Best Trailer Hitch for a Subaru Outback

2018 Subaru Outback

Among the many Asian manufactured sports utility vehicles distributed in North America, the Subaru Outback seemed to gain the strongest market traction. Since its debut in 1994, the moniker has been easily attached to a design variety resembling the first line SUV’s circulated in Australia. This Japanese vehicle brand is one of the most awaited new versions for the year 2018.

Although SUV’s are expected to carry extra weight and space, in reality, there is so much that this vehicle can handle. Finding the best trailer hitch for Subaru Outback is an advantage if you consider hauling trailers, lifting cargo boxes or strapping small bipedal vehicles. Consider some of the basic features of the upcoming 2018 Subaru Outback in connection to pulling extra weight:

  • Base curb weight: 3,622 lbs
  • Towing capacity: 2,700 lbs
  • Max tongue weight: 270 lbs

The average empty weight of a trailer camper is around 5,000 lbs. If you include mobile water supply, gas tank, and other basic appliances you’d expect around 1,000 lbs of extra weight. Based on the details featured, the upcoming 2018 Subaru Outback is obviously shorthanded on its own – especially considering its ratio to the vehicle’s base curb weight.

The 5 Best Options

There is no doubt that a good trailer hitch is necessary to prevent straining the vehicle’s towing capacity. However, it is important to remember that not all variety of trailer hitches goes well with the 2018 Subaru Outback. Here are the following options you can choose for the ideal definition of a Subaru Outback trailer hitch:

Curt Class 1 Trailer Hitch

CURT 19030 Step Bumper Hitch Receiver, 2-Inch Receiver, 5,000 lbs.
  • Tongue weight: 500 lbs
  • Receiver size: 2 inches

What sets this particular Subaru Outback tow hitch apart from other varieties is that it is designed for the vehicle’s bumper area instead of the frame, which makes installation relatively more convenient. You should remember, however, that the performance of this hitch depends on the bumper’s weight capacity rating. 

Ultimately, you can rely on this option if you prefer something very affordable but doesn’t fall short of quality performance.

Curt Class 2 Trailer Hitch

CURT 12108 Class 2 Trailer Hitch, 1-1/4-Inch Receiver, Select Black 1-1/4' Toyota RAV4
  • Tongue weight: 350 lbs
  • Receiver size: 25 inches

Among the most notable positive features of this trailer hitch is that it has a limited lifetime warranty.

Like most trailer hitches installed at the 2018 Subaru Outback frame, this model usually takes around 45 minutes to set up.

You may also love the fact that its conventional distribution already includes every basic component of the installation kit such as the hitch pin and clip.

Curt Class 3 Trailer Hitch

CURT 13206 Class 3 Trailer Hitch, 2-Inch Receiver for Select Subaru Outback
  • Tongue weight: 600 lbs
  • Receiver size: 2 inches

Unlike the previously mentioned variety from Curt, this model is designed to accommodate a heavier wheeled payload.

While it is known to be a custom-fit trailer hitch, this particular item emphasizes its closer affinity with the Subaru Outback series. Always remember never to exceed beyond the maximum towing capacity of 4,000 lbs.

A further note on weight capacity: you need also need to consider the element of weight distribution.

 Balance is crucial when it comes to towing convenience, especially if the wheeled load goes too far from the ratio scale. Luckily, this trailer hitch is flexible enough to link with a weight distribution.

Draw-Tite Class 2 Frame Hitch

Draw-Tite 36493 Class II Frame Hitch with 1-1/4' Square Receiver Tube Opening
  • Tongue weight: 300 lbs
  • Receiver size: 25 inches

This trailer frame hitch model is particularly noted for its neat and rigid symmetrical design – not aesthetically bow-curved like some brands. What it may lack for preferential appearance, it surely makes up for its performance.

The Draw-Tite is guaranteed to withstand the perils of long-distance towing through a very rough terrain.

Draw-Tite Class 3 to 4 Max Frame

DRAW TITE Class III-IV Max-Frame Receiver Subaru Legacy 2010-2017# 75673
  • Tongue weight: 600 lbs
  • Receiver size: 2 inches

This model inherits the same advantageous features of its lower class frame hitch. It can endure road abuse and similarly requires around 45 minutes of installation. The only real difference between this item and the Class 2 model is that it is meant for bigger and heavier wheeled cargo.

Speaking of weight capacity, you should also remember that this hitch does not have any weight distribution capacity.

You have to keenly watch out if there is a risk of the vehicle losing its balance. It is also important to consider that this item is comparatively more expensive.

Ultra-Fab Trailer Hitch

Ultra-Fab 35-946403 Trailer Hitch Receiver
  • Tongue weight: 350 lbs
  • Receiver size: 2 inches

On top of hauling a mobile home or camper from the back of your 2018 Subaru Outback, you might have also considered adding more burden in a way that will not risk straining your car’s balance or towing strength. In case you need to pack your generator or extra bike for a remote outdoor vacation, you could use this hitch to receive cargo carriers or bike platforms.

Last update on 2020-07-21 / Affiliate links / Images from Amazon Product Advertising API

Leave a Comment